|
JAIST Repository >
c. マテリアルサイエンス研究科・マテリアルサイエンス系 >
c10. 学術雑誌論文等 >
c10-1. 雑誌掲載論文 >
このアイテムの引用には次の識別子を使用してください:
http://hdl.handle.net/10119/18014
|
完全登録情報レコード
| ダブリン･コア･フィールド | 値 | 言語 |
|---|
| contributor.author | Kugimoto, Daisuke | en_US |
| contributor.author | Kouda, Shingo | en_US |
| contributor.author | Yamaguchi, Masayuki | en_US |
| date.accessioned | 2022-07-19T02:00:35Z | - |
| date.available | 2022-07-19T02:00:35Z | - |
| date.issued | 2019-08-01 | en_US |
| identifier.uri | http://hdl.handle.net/10119/18014 | - |
| description.abstract | We investigated the structure and properties of binary blends comprising poly(lactic acid) (PLA) as a matrix and ethylene–vinyl acetate copolymer (EVA), by considering the effect of the vinyl acetate (VAc) content in EVA. The interfacial tension with PLA was found to decrease with increasing the VAc content. Therefore, blends comprising EVA with a high VAc content have fine EVA particles, and exhibit marked mechanical toughness and good transparency. Although pure PLA is prone to brittle fractures, the addition of EVA leads to shear yielding, which is prominent when the matrix ligament thickness is shorter than a critical value. The cavitation process in the dispersed EVA particles is also responsible for the mechanical toughness, which is obvious in EVA with a high VAc content. | en_US |
| format.extent | 1931600 bytes | - |
| format.mimetype | application/pdf | - |
| language.iso | en | en_US |
| publisher | Elsevier | en_US |
| rights | Copyright (C)2019, Elsevier. Licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International license (CC BY-NC-ND 4.0). [http://creativecommons.org/licenses/by-nc-nd/4.0/] NOTICE: This is the author's version of a work accepted for publication by Elsevier. Daisuke Kugimoto, Shingo Kouda, Masayuki Yamaguchi, Polymer Testing, 80, 2019, 106021, https://doi.org/10.1016/j.polymertesting.2019.106021 | en_US |
| subject | Poly(lactic acid) | en_US |
| subject | Mechanical properties | en_US |
| subject | Polymer blends | en_US |
| subject | Transparency | en_US |
| subject | Morphology | en_US |
| title | Improvement of mechanical toughness of poly(lactic acid) by addition of ethylene-vinyl acetate copolymer | en_US |
| type.nii | Journal Article | en_US |
| identifier.niiissn | 0142-9418 | en_US |
| identifier.jtitle | Polymer Testing | en_US |
| identifier.volume | 80 | en_US |
| identifier.spage | 106021 | en_US |
| relation.doi | 10.1016/j.polymertesting.2019.106021 | en_US |
| rights.textversion | author | en_US |
| language.iso639-2 | eng | en_US |
| 出現コレクション: | c10-1. 雑誌掲載論文 (Journal Articles)
|
このアイテムのファイル:
| ファイル |
記述 |
サイズ | 形式 |
|---|
| 163.pdf | | 1886Kb | Adobe PDF | 見る/開く |
|
当システムに保管されているアイテムはすべて著作権により保護されています。
|
