JAIST Repository >
c. マテリアルサイエンス研究科・マテリアルサイエンス系 >
c10. 学術雑誌論文等 >
c10-1. 雑誌掲載論文 >

このアイテムの引用には次の識別子を使用してください: http://hdl.handle.net/10119/4967

タイトル: Characterization of α-phase aluminum oxide films deposited by filtered vacuum arc
著者: Yamada-Takamura, Y.
Koch, F.
Maier, H.
Bolt, H.
キーワード: B. Infrared spectroscopy
B. RBS
B. TEM
C. Filtered arc
C. Ion bombardment
D. Aluminum oxide
発行日: 2001-07
出版者: Elsevier
誌名: Surface and Coatings Technology
巻: 142-144
開始ページ: 260
終了ページ: 264
DOI: 10.1016/S0257-8972(01)01206-3
抄録: Aluminum oxide (Al_2O_3) films were deposited by filtered vacuum arc method, using highly pure aluminum cathode and oxygen gas. Substrate temperature as high as 780 ℃ was necessary for the formation of corundum structured α- Al_2O_3. Applying RF power and thus negative bias voltage to the substrate enables to increase and control the energy of substrate bombarding ions. With the negative bias voltage of 200V, it was possible to deposit films containing α- Al_2O_3 with preheating substrate to temperature lower than 500℃. Increasing the voltage, thus increasing the ion energy, resulted in lowering of the critical preheating substrate temperature for formation of α-phase. Additionally, there was a clear difference in crystal orientation of α- Al_2O_3 between the films grown with and without substrate bias voltage, which was confirmed by infrared spectroscopy. Structure and phase evolution of the film were also studied by cross-sectional transmission electron microscopy.
Rights: NOTICE: This is the author's version of a work accepted for publication by Elsevier. Y. Yamada-Takamura, F. Koch, H. Maier and H. Bolt, Surface and Coatings Technology, 142-144, 2001, 260-264, http://dx.doi.org/10.1016/S0257-8972(01)01206-3
URI: http://hdl.handle.net/10119/4967
資料タイプ: author
出現コレクション:c10-1. 雑誌掲載論文 (Journal Articles)

このアイテムのファイル:

ファイル 記述 サイズ形式
C10026.pdf1392KbAdobe PDF見る/開く

当システムに保管されているアイテムはすべて著作権により保護されています。

 


お問い合わせ先 : 北陸先端科学技術大学院大学 研究推進課図書館情報係