|
JAIST Repository >
c. マテリアルサイエンス研究科・マテリアルサイエンス系 >
c10. 学術雑誌論文等 >
c10-1. 雑誌掲載論文 >
このアイテムの引用には次の識別子を使用してください:
http://hdl.handle.net/10119/4969
|
| タイトル: | Microstructure and nanomechanical properties of cubic boron nitride films prepared by bias sputter deposition |
| 著者: | Yamada, Yukiko
Tsuda, Osamu
Yoshida, Toyonobu |
| 発行日: | 1998-03-21 |
| 出版者: | Elsevier |
| 誌名: | Thin Solid Films |
| 巻: | 316 |
| 号: | 1-2 |
| 開始ページ: | 35 |
| 終了ページ: | 39 |
| DOI: | 10.1016/S0040-6090(98)00384-8 |
| 抄録: | Nanoindentations, using a triangular based cube-corner shaped diamond tip, were tried to study the mechanical properties of cubic boron nitride (cBN) films. Since the cBN film has a layered structure consisting of an initial sp^2-bonded BN (amorphous BN and turbostratic BN) layer and a sp^3-bonded BN (cBN) layer, which was previously studied by cross-sectional transmission electron microscopy (TEM), cBN films in different growth stages were prepared for the measurements. Hardness and elastic modulus were evaluated as a function of the penetration depth from the obtained loading-unloading curves using a method described by Oliver et al. The maximum hardness and elastic modulus of a 110-nm-thick cBN film (including an approximately 50-nm-thick initial layer) were approximately 10 and 3 times, respectively, larger than the values evaluated for a silicon wafer substrate. The dependence of the evaluated hardness and the elastic modulus on film thickness and penetration depth can be explained in terms of the layered structure of the cBN film, i. e. soft initial sp^2-bonded BN layer with low elastic modulus, and hard cBN layer with high elastic modulus. |
| Rights: | NOTICE: This is the author's version of a work accepted for publication by Elsevier. Yukiko Yamada, Osamu Tsuda and Toyonobu Yoshida, Thin Solid Films, 316(1-2), 1998, 35-39, http://dx.doi.org/10.1016/S0040-6090(98)00384-8 |
| URI: | http://hdl.handle.net/10119/4969 |
| 資料タイプ: | author |
| 出現コレクション: | c10-1. 雑誌掲載論文 (Journal Articles)
|
このアイテムのファイル:
| ファイル |
記述 |
サイズ | 形式 |
|---|
| C10030.pdf | | 249Kb | Adobe PDF | 見る/開く |
|
当システムに保管されているアイテムはすべて著作権により保護されています。
|
